PRECISION PRIME is the entry point to jet cooling: efficient, reliable die cooling for small to medium die casting setups, without the complexity.
It drives cooling water at high velocity into the die's hot spots — the thin sections and core pins that ordinary line cooling never reaches — so the casting solidifies sound instead of tearing itself apart as it cools.
Plug & play operation and low maintenance cost, suitable up to 20 pins.
PRECISION NEO is proven and reliable jet cooling technology, built for high performance and consistent casting quality shot after shot.
It is the machine to reach for when the defect sits in thin sections and around core pins — the places where shrinkage porosity starts and where cooling has to be precise, not merely present.
Casters trust this plug & play machine for its optimal cost-performance and its international standard components.
Efficiency and flexibility make PRECISION VAC ULTRA a uniquely acceptable vacuum system.
Two-stage evacuation — first the shot sleeve, then the mold — empties the cavity before the metal arrives, so there is simply nothing left for the shot to trap. That is what minimises gas porosity, and it is why leak-tested and safety-critical castings specify vacuum rather than venting alone.
Serves the purpose, and saves you tons of money in rejection.
PRECISION VAC EXPAND is an extension unit mounted close to the mold. The shorter the path, the shorter the actuation time — and the better the vacuum efficiency at the point where it actually matters.
It is the vacuum solution for high-tonnage casting, where cavity volume and fill speed leave no margin for a slow-responding system.
Up to four extension units can be connected to one PRECISION VAC EXPAND.
PRECISION AQUA SMART is a water temperature and conductivity (TDS) controller for jet, spot and line cooling. It closes the loop on your existing or new jet cooling machine.
Die casting drifts. Water warms, conductivity climbs, scale builds inside cooling channels and jet coolers — heat transfer drops, die temperature creeps up, and shrinkage porosity comes back even though nothing on the machine changed.
Controlling the water is what keeps the cooling you bought working. It also cuts water consumption cost, and it is fully automatic.
Machines stop defects; consumables keep them stopped. These are the components that live inside the die and take the heat, shot after shot.
High-grade raw material, controlled heat treatment and nitriding — so a worn part is a five-minute change, not a lost shift.
Beyond jet cooling and vacuum, the systems that feed and stabilise every cooling loop — listed alongside our core machines in the catalogue.
Stable, sized cooling capacity for jet cooling loops and die temperature control — a self-contained, mobile unit with touch-screen control.
Troubled with shrinkage or gas porosity?
Send whatever you have — a drawing, a phone photo of the defect, a rejection report. An engineer, not a sales script, will come back to you.
The full enquiry form — with attachment notes and a direct line to our engineers — is on the contact page.
