PRECISION NEO is proven and reliable jet cooling technology, built for high performance and consistent casting quality shot after shot.
It is the machine to reach for when the defect sits in thin sections and around core pins — the places where shrinkage porosity starts and where cooling has to be precise, not merely present.
Casters trust this plug & play machine for its optimal cost-performance and its international standard components.
Specs
| Core pins cooled | 20 · 40 · 60 · 100 Nos |
|---|---|
| Cooling channels | 02 · 04 · 06 Nos |
| Touch screen HMI | Mitsubishi 7″ |
| Data storage & transfer | 16 molds / 200 productions |
| Measurement | Flow rate per channel · air & water pressure |
| Detection | Core pin breakage · earth leakage · over/under voltage |
| Dimension (H×W×D) | 1600×1000×700 mm |
| Operation | Plug & play; runs on a potential-free shot signal from the DCM |
Figures are from the Precision System Equipments Catalogue, Edition 2025. Mold-side hardware and channel selection are quoted against your die — send us your drawings.
How it is plumbed
Also in the range
Entry-level jet cooling for efficient, reliable die cooling — up to 20 pins.
Two-stage evacuation from shot sleeve and mold. Sizes 250 to 1000 litres.
An extension unit at the mold: faster actuation, better vacuum efficiency, high-tonnage ready.
Let’s cut your scrap rate
Send whatever you have — a drawing, a photo, a rejection report. An engineer, not a sales script, will come back to you with what we'd actually do.
